June 25, 2026
Description
This is a digital 3D printable model of the blaster from Star Wars. Made an article about post-processing and painting this blaster prop in cel-shaded style here.
The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
SIZE
At 100% scale, the blasters are approx. the same size as in the Star Wars movies.
You can scale the model as you wish.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be glueing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
This model is a non-functional replica of a blaster. It's not meant as a weapon but as a cosplay accessory.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
License:
Commercial Use - No Derivative
3Demon
