Utility Knife

There are two versions: “glue” and “M3”

The “glue” version requires you to glue the blade in place. This means once the blade is done you'll have to throw away the knife and print a new one. This makes for a super cheap expendable knife.

The “M3” version uses a couple of M3 nuts and bolts to secure the blade. This is useful if you whant to replace the blade without printing a new handle.

In both designs the two halves of the sheath should be glued together.

Safety disclaimer: Utility blades are very sharp. Please use this knife with care. I do not take any responsibility for the damages the misuse of this knife may produce. If your'e under 18 years old do not print this knife without the supervision of an adult person.