April 30, 2022
Description
On the DF700 Flux the rear 120mm fan air intake is blocked by the psu.
This design allows an intake of airflow to the fan from the rear of the case through the pci slot covers.
Printer:
Ender 3 v2
Rafts:
No
Supports:
Yes
Resolution:
.3
Infill:
20%
Filament:
3D Solutech PLABlack
Notes:
To mount spacer in case loosen the bottom thumb screw on the pci-e slot protector . (see picture) .Tighten screw until the spacer doesnt move.
License:
Creative Commons — Attribution