April 30, 2022
Description
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions, depending on if you intend to use the rear facing camera or not.
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: extrudr Greentech Pro silver
Notes:
For improved layer adhesion, print with 0.15 mm layer height and 0.6 mm line width on a 0.4 mm nozzle.
Make sure to choose material that can withstand the temperatures in your car, your standard PLA will start deforming at or even below 60°C.Snap onto the existing mount with care. If tolerances are too tight, use a needle file where necessary. Check regularly to not introduce too much slack.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
andy
