December 30, 2022
Description
This clip is perfect in combination with duplo 2x2 bricks to build stable supports for brio track bridges.
Check out my other models to build a sloped ramp for those bridges:
There are two variants of the clip, one with cut-outs that avoid collision with the ramp segment. The other one (planar) maximises the support area for straight and curved rails.
For a multi-level bridge system, you may want to check out BeamBridge by designer Dejf.
Please make sure to print with quality, not-too-brittle material and to tune the print settings for good layer adhesion. Otherwise, the clamps may break easily.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
andy
