May 2, 2022
Description
A Remix of "Bat top for Sanwa joystick leber" by user okayumoka. I decided to remix it because upon inspecting their work, the stl files came with no thread, and so, I put a thread on it.
Ever wanted to try a bat top on your Sanwa lever, but don't want to pay for shipping since you're unsure if you'd like it? Try printing one of these first!
I've made an additional shortened version of the bat top (Which is my preference. I don't actually think they sell shortened bat tops anywhere.).
The thread works great with my Sanwa JLF TP-8YT-SK lever. Due to the nature of the material, these won't hold up of you ride the gate a lot when you play (or if you rage and abuse the stick a lot.). For standard play, these should hold up nicely.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
40%
Filament: eSun PLA+ Fire Engine Red
Notes:
PRE-REQUISITE FOR EXACT PRINT SETTINGS:
* Install the "Custom Supports" version 0.1.0 mod by Krasimir Stefanov on the Cura Marketplace. * The Cura version used for this print of mine is version 4.10.0Printer model: Ender 3 V2
Filament: eSun PLA+
Filament Color: Fire Engine Red
Layer Height: 0.2mm
Initial Layer Height: 0.2mm
Line Width: 0.4mm
Wall Thickness: 0.8mm (Light use)
OR
Wall Line Count: 10 (Heavy duty)
Top/Bottom Thickness: 0.8mm
Top Thickness: 0.8mm
Top Layers: 4
Bottom Thickness: 0.8mm
Bottom Layers: 4
Enable Ironing: YES
Infill Density: 40%
Infill Pattern: Zig Zag
Printing Temperature: 205C
Printing Temperature Initial Layer: 205C
Build Plate Temperature: 60C
Build Plate Temperature Initial Layer: 60C
Flow: 100%
Initial Layer Flow: 100%
Printer Speed: 72 mm/s
Infill Speed: 72 mm/s
Outer Wall Speed: 36 mm/s
Inner Wall Speed: 55 mm/s
Top/Bottom Speed: 55 mm/s
Support Speed: 36 mm/s
Travel Speed: 180 mm/s
Initial Layer Speed: 20 mm/s
Enable Retraction: YES
Retraction Distance: 6.0 mm
Retraction Speed 45 mm/s
Enable Print Cooling: YES
Fan Speed: 100%
Generate Support: NO (I use a plugin called "Custom Supports" by Krasimir Stefanov, available on the Cura Marketplace. Please research on how to use that beforehand.)
Support Pattern: Grid
Support Density: 40%
Enable Support Brim: YES
Enable Support Interface: YES
Build Plate Adhesion Type: Raft
Raft Extra Margin: 15 mm
Raft Smoothing: 5mm
Raft Air Gap: 0.3mm
Raft Top Layers 2
Raft Top Layer Thickness: 0.2mm
Raft Top Line Width: 0.4mm
Raft Top Spacing: 0.4mm
Raft Middle Thickness: 0.3mm
Raft Middle Line Width: 0.8mm
Raft Middle Spacing 1.0mm
Raft Base Thickness: 0.24mm
Raft Base Line Width: 0.8mm
Raft Print Speed: 36.0mm
The printed bat top beside the red ball top my Sanwa JLF TP-8YT-SK came with.
Close-up Shot
License:
BSD License
ThespianMask
