Open Spiral Dice Tower

This Dicetower fits standard dice or dice slightly bigger (maximum diameter 30mm). The spiral cuts a slit all around the tower so you can see your dice without any transparent materials or grids.

Supports are only recommended for the slit, the spiral tunnel itself should print fine without supports. Paint on supports do great for this application as well as support blockers.

There is also a box edition available with gates to keep your dice inside the tower for transportation. 

Also several trays that fit the tower are available.

And a new hexagonal version for a more futuristic design here.

For all the super tiny dice, a micro version:

Update1:
Added a stackable version of smaller pieces, to print on smaller machines and glue together later on. The middle piece can be printed multiple times to stack up in height.

Update2:
Added a tray on request to go with the tower. See trays above.

Update3:
Added a new version 10_8_3 with a little detail at the gate. The small section on the free hanging slit part is sometimes a bit tricky to print. This gate will help to support this and give a cleaner look. So far I've not printed it to test this.
Updated version 10_8_3 and made the gateframe thicker for better printing.

Update4:
Added a 4th version of the tray with storage for your dice and a small rolling area. Its in the style of a moat. Thanks for the suggestion of this style to D.J.Chase over at YouTube. I would have just made a round tray, but the moat theme is so much better.
And added a second version of the new tray with a longer bridge for a bigger rolling surface to hold more dice. No one wants to split roll a fireball. Also it has a pencil holder. So you can throw in all your loose stuff (pencil, rubber, sharpener and minis) nothing will fall of the tray.

Update5:
Added a futuristic version of the tower.

Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.