May 18, 2022
Description
This is an X wheel for an Anet A8 or similar printer. It fits on the 5mm shaft of the Nema 17 motor that drives the X axis.
Back story...
I gave a printer kit I got off Ebay to a neighbor kid, who is friends with my youngest son.. He was very excited and built it to the best of his abilities..
I examined the printer and found a few flaws in the build and a few design failures in the printer (this was a $50 kit made of really cheap plywood and an almost exact clone of an Anet A8 except for the frame material) It had a poorly designed bed carrier that would hit the Y motor before hitting the end stop and the frame was very wobbly, so I printed some stiffeners and designed various other parts to allow it to work.
I knew the kid is a Zelda fan so I designed and printed this Triforce X axis wheel decoration for it..
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
No
Resolution:
0.07
Infill:
100
Filament: anycubic Resin White
Notes:
I printed this on an Anycubic Photon Zero.. but this would also print well on any FDM printer as well....
Just know that this is a very small print so small layer heights would be advantageous...I used Designspark Mechanical to design this.. only took a few minutes to design and because of the resin printer it printed really fast too....
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
HAL_9000
