Toy Train BNSF locomotive BRIO / IKEA compatible

BNSF diesel locomotive toy train (BRIO / IKEA compatible)

You will need the following screws to put everything together.
14x ISO 14585 (DIN7981) 2.9mm x 13mm (https://amzn.to/3WgKty1)
2x ISO 14585 (DIN7981) 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)

Add ring magnets on each side of the train. Use 2x ISO 14585 (DIN7981) 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)

The GCODE of "bnsf_train_body.gcode" contains 2 filament color changes at 2.80mm (Layer 24) and 4.80mm (Layer 42) and the support enforcer.

If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you! Lovely 3D printed Toy Trains

Print instructions

You will need to add supports for the following parts:

belly.stl (normal supports for counterbored holes)
bnsf_train_body.stl (support enforcer for counterbored holes)
roof.stl (support enforcer for the roof at the back)

Prusament Galaxy Black PLA
Prusa Yellow PLA
Prusa Orange PLA
Prusa Silver PLA

Copyright:

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863

The digital files (STL and other formats) may never be resold, shared, remixed or given away.