Yoda Collapsing Lightsaber

So I decided to continue (re)mixing CaseStudyno8´s designs (https://www.thingiverse.com/thing:1866782) and 3DPRINTINGWORLD´s ideas (https://www.thingiverse.com/thing:3606120) to create my own Yoda's collapsing lightsaber. So again I remodeled the whole thing to fit the collapsible blade. Multiple parts were put together so it is less about gluing and more about layer color changes within the print. The Blade is also remodeled. It has a steeper angle, so it is not so thin at the end which also helped the blade to be longer and broader. Plus the tip curve fits better.

It is modeled with the same tolerances, so I hope it will work as well as it did before.

Download, print and enjoy! :)

3D printing settings

Many parts are supportless designs, but you will find some parts that will require support or even a brim (long tall parts).

The hilt (PLA):
layer height: 0.125
infill: 10%-20% (20% for small parts)
perimeters: 2
supports: if needed
brim: if needed
ironing: on

The blade (transparent PETG):
layer height: 0.3
extrusion width: 0.6
vase mode: on
supports: off
brim: on, 5mm