Hemera Spinner ~ A 3D Printer stress test

MODEL DETAILS

This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. 
If you liked this model, why not try out our other stress tests too?

You can find out all about Revo Hemera XS here!
 

RECOMMENDED PRINT SETTINGS

Designed for 0.4 Nozzle and 0.2 layer height
Feel free to try other scales, nozzle sizes and layer heights but your results may vary!

Have some extra bed adhesion on hand
The fan running down the centre of the model is only secured by a tiny footprint and is therefore very prone to coming loose from the build plate.

Use some lubricant or grease on the gears if you have it
The gears might feel a little jammed/stiff when you first get the print off the bed. Adding a little grease can help the gears to run more smoothly and continuously. If the gears are totally stuck, your dimensional accuracy or print quality might be to blame. 
 

DESIGNER

Designed by Will Hardy.

Check out E3D!