!!! Halloween !!!- Spooky spider fridge magnet - improved version!

Spooky spider fridge magnet
If you like it --> press like it :-)

Here a model of the famous spider model from Jason C Kessler. I´ve added two sockets for magnets 5x3mm. Just make a pause at the top of the installation space(look before in your slicer for the layer number or height), install the magnets and resume the print. The black one had a print time of only one hour!

There is only 0,2mm at the bottom, so that the holding force will be good. You can see the magnets in the pictures, because its transparent blue PETG.

 If the overhang of the feets make no problem at your printer, you only should need supports at the teeth now → this relates to Spider_magnet

Update: Spider_magnet_V2 → improved version  with longer teeth, that you need no support. I´ve printed the black one only with brim on my stock CR-10 V2!

If you scale it to 200% you can use  10x5 magnets or 300% to use 15x8 magnets, but this is not testet. With the shared model size, it works perfect with the force of my N50 grade magnets. 

It looks cool and you can also use it for Halloween to scare your wife, husband, kids or friends ;-)
Just put it on your fridge, the car door or somewhere else and be happy...

If you are interested in more scary stuff, take a look at my other models like the giant spider, which is printed in vase mode!

https://www.printables.com/de/model/288796-giant-vase-spider-posable-halloween-print-in-vase-

Would be happy to see your makes!