Joystick Project

Build your own Flightstick. Instructions:

https://github.com/67bope/USB_PPM

Inspired by DroneMesh-Project:

and a Pawel Spychalski Video:

Parts used:

1. FuriousFPV Power Cable 95mm With XT30 Female and DC 2.1mm Female Plug For SPC-TBS Crossfire TX
2. Frsky R9M Module (or any other with ppm support, i.e. Orange JR Module)
3. USB Host Shield
4. Arduino UNO
5. Lipo: 7-12V input for Arduino, 4- <12V for R9M --> use 2s Lipo!!! (7,4V)
6. Y-harness: XT60 to 2x Male DC 5.5mm*2.1mm (or sth. similar)

or a single Powercable, if you use the Arduino Connector (+ to Vin and - to GND).

Other Projects: https://www.thingiverse.com/thing:4576634 (highly recommended)

https://www.ianjohnston.com/index.php/projects

https://www.instructables.com/id/Create-a-Joystick-Using-the-Arduino-Joystick-Libra/

Category: R/C Vehicles