July 15, 2023
Description
This is a wheel guide you can attach to your weed eater (whacker, trimmer) to make it easy for you to trim the edges of your lawn where it meets the sidewalk.
This should work on most trimmers that have about a 1 (or 3/4) inch diameter pipe.
It is very lightweight. The bearing accounts for almost half the weight.
Unassociated tags: Weed Eater
Materials Needed:
1x of each of the printed parts.
3x Dry wall screws. (1.25 to 1.5 inches long)
1x 608 bearing. (Shielded recommended but you could use unshielded from an old fidget spinner)
Print Settings Layer height = .2 mm
Supports = No
Raft = Doesn't matter
Filament = PETG reccomended
Perimeters = 6 (make the walls about 3 mm thick)
Infill = 30 %
All required parts
How to assemble
Assembled and attached
... please click the like button.
Thank You
License:
Creative Commons — Attribution
Mordiev
