Spannerhands Spool System MK6 - Wide Kobalt K-Rail Mounting Bracket

Attention: I no longer recommend building and using these dryboxes. They are kind of a pain with little benefit. See my build below for an explanation.

My complete Spannerhands MK6 System build: https://www.thingiverse.com/make:674461

I liked the idea of TrevJonez's Spannerhands Spool-holder rail-mount, but since my boxes are going to have all their weight on these slides, I wanted a wider surface with twice the TPU pads to make sure everything sits stable. Fortunately, TrevJonez provided his Fusion360 file, making it easy to remix.

Not only is this one wider to provide a more stable seat, but the hook more closely matches the width of the mount-point on the spannerhands box. This encourages the box to sit squarely on the TPU pads.

Here is the rail that it mounts to. I bought it for $11 at Lowes: https://www.lowes.com/pd/Kobalt-1-Piece-Black-PVC-Storage-Rail/3374252

This file seats four of the TPU "Mount_TPU_Pad_v2" included in the Spannerhands MK6 files.

Like the original, It also uses an M3 12mm bolt and an M3 square nut to lock the slide from moving along the rail.

Print Settings

Supports:

Yes

Resolution: 

0.2 mm Layer Height

Infill:

10%

Filament:

eSUN PLA

Notes:

I printed this on its side with supports touching the build plate.

Category: 3D Printer Accessories