Wall Spool Holder

Another spool holder for wall mounting.

You have to print:

• 2x pipe_adapter.stl
• 4x pipe_adapter_lock.stl
• 2x adapter_pin.stl
• 2x holder.stl

You also need:

• 2x 608 bearing
• Plastic pipe, outer diameter 40 mm, thickness of 2 mm. You can modify the parts to match your pipe.
• Some pieces of wood for the sides.
• Some screws and washers.

To assemble it:

1. Press bearing intopipe_adapter
2. Pressadapter_pin into bearing
3. Secure the pin with a screw to the bearing
4. Place twopipe_adapter_lock around thepipe_adapter
5. Push the pipe over all parts
6. Repeat steps 1–5 with the other side
7. Build the wooden frame
8. Mountholder to the wooden frame
9. Screw it to a wall, finished.

Have a look at the images, they might explain it better.

Category: 3D Printer Accessories