Hovalin v5 Bridge Fix

This is a remix of the bridge part of the Hovalin, a 3D printable violin from Hova Labs (https://www.hovalabs.com/hovalin).

The bridge part included in the Hovalin download from Hova Labs is too short. It doesn't hold the strings above the fingerboard on the instrument. This remix adds about 10mm height to the part.

The license included with the download from Hova Labs says:

These files (Hovalin v5.1.0) are licensed as Creative Commons Attribution-ShareAlike 4.0 International License.

This means that you are welcome to modify and distribute the design and derivatives thereof. You must, however, share your design under this same license and give credit to Hova Labs, LLC with all derivatives and copies. You may use the Hovalin for commercial purposes under these same constraints.

If you wish to use assets from the Hovalin or hovalabs.com for any media or promotional purpose, please contact us at [email protected]