June 24, 2022
Description
These are the files used to update the ZeroG/Mercury 1 to use 2 MGN9H rails and the Voron Afterburner. You will need to use the 2.8mm shim plate to keep the belt alignment perfect otherwise it will dip in.
The chain mount is for a 10x20 openable chain and the tower. You will use unscrew 2 screws from the Nema17 from the CW and use them to tie the chain plate into the back of the motor. Be sure to measure your screw length and you may need to go a bit longer and or dremel one to custom length.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Al Mon
