February 22, 2020
Description
An open 3d printed frame for Mini ATX (and a bit larger) motherboards. It is sitting on top of the PSU and has 30mm standoff brass spacers to allow for ventilation of the PSU as well as space to hide the cables. It features support for up to 2x SSD Drives or 2.5" HDD drives.
You will need 6 or 8 M3 square nuts and 4 M3 Standoffs (brass or nylon is fine) for mounting the board on the case and mounting the ssd/hdd case(s) to the sides.
Simply print flat on the surface. Use 0.2mm or even 0.3mm layer height.
License:
Creative Commons — Attribution — Noncommercial
INUX3D
