Spinning Bike Fan Mount

I made this to get some wind in my hair while biking indoor. I think the fans are pretty standard.

The are mounts for square stem and 33mm round bike handle. However, I include Solidworks and STEP files for the mount so you could make one that fits your handle. The handle mounts are fixed with strips to minimize the use of screws.

The gap on the arm is wide enough to thread the USB end trough. So, you could get it out of the way.
The power supply I a cheap one I got of eBay. You Probably won’t find/have the same, so I include the Solidworks and STEP files.

You Will Need (for one complete holder):
-5mm strips (only for the handle)
-fan
M3 Screws and bolts ->
-2x 25mm
-2x nuts (4x for stem mount, and 2x for USB power adapter)

LINKS:
6 port USB charger: shorturl.at/psvW5
Fan shorturl.at/gkpF7

Please send me a message if you have a question.
If you mix or modify, please plug me.

Print instructions

Prints without support.