Seattle Space Needle

I found this recently on Thingiverse and thought it would make a nice addition to Printables since I couldn't find a Space needle on here, and the original uploader (U/Intentional3D) doesnt appear active anymore. These are not my original files.

Here's the copied description 

**

This model of the iconic Seattle Space Needle stands 40 cm tall.

[7/20/2015] Update: Fixed the center screw and made the antenna thicker.

---Instructions---This model prints without supports though you may want to use a raft for the tall slender pieces. You may need to glue the lower part of the top observation deck to the legs and the bottom part of the legs to the base. The rest of the pieces screw together so that they can be separated for transportation or replaced if broken.

For best results printing the antennae in Top1.stl set fan power to 100% and use a minimum layer duration of 5 seconds.

 **

Photographed model was printed in Petg without recommended settings modification. 

Happy Printing!

https://www.thingiverse.com/thing:567695