Magnetic Fidget, LEGO Inspired

One of my first self-modeled magnet fidget designs. This one was inspired by LEGO bricks in that the dots are the same size and spacing, though they are only 2D, not 3D. You can't connect a LEGO stud to this print.

You'll need nine 6x3mm round neodymium magnets to install into this print after it has completed. I recommend a flexible glue, such as the blue cap Gorilla brand super glue, to hold the magnets in. Even if they are a snug fit, playing with the fidget can work them loose if they are not glued in. 

Don't forget to flip over the magnets when you install them into the other half, or you'll have parts that repel rather than attract!