July 16, 2022
Description
This is the V2.
The vertical fence was too thin and broke too easily.
Their diameters are now 3 mm instead of 2 mm.
Change the perimeters number to 3 to fulfill it.
Before, you had to glue the top railing. Now everything is in one part.
There are some overhangs, but I think the MK3 is very capable of printing them.
Let me know if any modifications are needed.
I redigned the door that did not work.
Unfortunately you have to print it with few supports and a brim.
Once the print is complete, you will need to cut the support between the two axes
Change Periters to 3 for fullfil the fence
@Photon1X : sorry for all the time spent between your request and the publication.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
djedje_zr7
