Modular magnetic DnD figure – Mage

All pieces of the model are ready to be 3D printed on an SLA printer. They are prepared for inserting cylindrical magnets.

Magnets we use:
Diameter 2 mm
Height 0.90 mm

SIZE
At 100% scale the mage’s dimensions are approximately:
Width: 35 mm
Height: 40 mm
Base diameter: 25mm
Neck diameter: 3.10 mm
Lower body diameter: 6.30 mm

You can scale the model as you wish. 

3D PRINTING SETTINGS
We recommend printing with an SLA printer (0.025mm layer height)  but you can print it at a larger scale on FDM printer for which we recommend these settings:

• Layer height 0.1 mm
• Infill 15%
• Supports 45°For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

ASSEMBLY
The holes in the models are prepared for inserting magnets (2mm diameter, 0.90 mm high)
Need to cut your own figures? And prepare them for inserting magnets? We made a manual on that! (PDF) and also a Youtube Tutorial.

Here are also our 3D printable condition markers for DnD heroes!