Inductive charger stand for Pixel 6

I designed this charging stand to be bolted on to a 2x4 block of wood stud (similar to the kind you'd find in most US home construction projects).

The 100mm disc of the inductive charger rests in the cradle after it has been mounted to the stud (by 2x wood screws). Make sure the stud is 130mm high and has an inclined angle of about 80 or so degrees.

The USB C connection snakes underneath the stud from the front and out the other end.

Optionally, I've included some stackable 5mm 'spacers' to really dial in the sweet spot for charging up your mobile phone. In my case, I've got a Pixel 6 and only needed one spacer.

Remember: print as-is, where is - no supports necessary!

If you found this useful, it would bring me great joy to see your work - so be sure to share. :)

Or, better yet, please feel free to dump a bitcoin or two here:

1Py3TUeR8noBN2giHyFV1GfB6x3Kh2WEVv

... include a note to the effect of "Hi 3E8, thanks for the inductive charger mount thing... our lives are several-fold times better than before on account of it".

You're welcome! (in advance) :D

Also, feel free to peruse my other submissions which are almost as varied as they are many:

http://www.thingiverse.com/Julius3E8/designs

Enjoy!

Category: Office