October 8, 2023
Description
My most practical model so far
It uses Bic Cristal Pen, and you can mount your phone, an action camera or light when you are in a video conference, taking pictures of a product or something like that.
You can slightly adjust the angle by adding or removing the cap on the leg you need
I have added:
And I will add one to use with tripod screw as soon as i get mine from amazon and can test it
I've tested it with two versions of bic Cristal pens, and they both fit well.
Super easy to print, just slice in the default orientation and you wont need supports
Recommended settings
material: PLA/PETG
layer height: 0.2 - 0.28
nozzle diameter: 0.4 or 0.6
fill: 12-15
perimeters: 2
supports: NO, as long as it is printed in the default orientation (with holes at buttom)
You can see my other models here:
________________________
If you like my designs and want to support me or sell physical prints, you can check out my patreon
https://www.patreon.com/meafdesigns
________________________
License:
Creative Commons — Attribution — Noncommercial
MEAFdesigns
