December 24, 2022
Description
Since the axes on both the Ultimaker 2 and the Ultimaker Original (Plus) are 18mm apart and use the same size rods, they can use the same printhead, but since the axes are the other way around the printhead gets turned 90 degrees, this modded piece fixes that.
Neotko did write a guide on how to do the upgrade with the Extrusion upgrade kit and published it here: https://community.ultimaker.com/topic/14065-assembly-manual-um2-upgrade-kit-on-ultimaker-original-plus/
Originally published on YouMagine back in 2016
License:
Creative Commons — Attribution — Share Alike
7
Cederb
