March 13, 2020
Description
just another fan holder for the davinci pro 1.0.
You do not need additional screws to fix the holder. It fits on the existing screws of the printhead.
I use a Titan TFD-B6015M12B fan.
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kuehlung-Lueftung/Gehaeuse-Luefter/?card=120238
You have to cut one screwhole of the fan. I used a Dremel. It is only fixed with two screws. The holes for the screws in the holder are 3mm. You can adjust the scad-file for other srews.
If you want to control the airflow I used this cheap fan control:
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kuehlung-Lueftung/Regelung-Steuerung/Stufenlose+Luefterregelung2C+Dre/?card=120477
To get power for the fan I did not want to change anything in the printer. I used an power extension cable to get 12V. It works really great and there is no danger for damage of solding directly to the printer. You find this cheap part here:
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kabel/Stromkabel-intern/?card=119749
There is an 60 cm extension for the fan-cable to. I used it to get a plug and cable.
So it is easy to change the fan:
https://www.nbm24.de/baumarkt/de/shop/Elektronik/Elektronik-Kategorie/Kabel/Stromkabel-intern/?card=120289
Category: 3D Printer Parts
License:
Creative Commons — Attribution
7
dickie24
