Mimic

A mimic, for your tabletop games! Scale it up or down as you please, it -should- be pre-sized for roughly 28mm scale, and is optimized for FDM printing with little to no supports. A nozzle smaller than .4 is optimal for fine detail, but will still print okay!

If you liked this model and want to show your thanks, you can buy me a coffee!

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

.12

Infill: 

15%

Notes:

Printed at 0.12mm layer height, 0.4mm wall thickness, 0.4 nozzle.

Printing with a 0.2 nozzle height would be ideal to get the teeth sharper :)

I used a single auto-generated support under the tongue, should be able to print without any real supports.

If the bottom of the model doesn't sit perfectly flat in your slicer preview, just lower the z offset by a small amount until it does!

If using Simplify 3D, try adding +0.10 Horizontal Size Compensation to help with fine details.

Category: Toy & Game Accessories