Filament Swatch with Printer Tests!

Introducing the ultimate filament test swatch! 

This little print covers all the basics for printer testing, as well as being a convenient filament test swatch, all with a place for a label and hole for a keyring. The label is sized for a standard address label (Avery 5160 or 5260) sticker you can get at most stores that sell stationary, or on Amazon HERE. This is a remix from this thingiverse design (also on Printables HERE), however I remodeled from scratch to make various changes. I changed the length to fit the labels, and modified the transparency thickness, small features, the keyring hole, stringing, and a few others features. See the Mini version with the same tests HERE!

Here is a list of all the tests included in this part, with pictures of each one below. 

• Overall dimensions
• Small holes (1mm, 2mm, 3mm, 4mm)
• Small Posts (1mm, 2mm, 3mm)
• Smooth surfaces / slopes
• Sharp inside corners
• Sharp outside corners
• Stringing
• Bridging (20mm, 15mm, 10mm, 5mm)
• Transparency (0.1mm, 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm, 2mm)
• Overhangs (25°, 35°, 45°, 60°)
• Thin gaps (0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm, 1.5mm)
• Thin walls (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm)

Don't forget to look at the Troubleshooting Guide to fix the issues you discover!

Happy Printing!

- Ty10y