October 8, 2023
Description
almost every sample available is kind of square, so I made my own with a more funny shape.
lets rock your filament!
Each finger is divided into sections with different thicknesses each so you can see the transparency depending on the number of layers. also a small sample of bridges and overhangs. and also a wall thickness sample. On the back there is enough space to write your filament information.
I also made a base that simulates a rocker bracelet, with space for 10 or 20 samples
PRINTING SETTINGS
Material: whatever you want
Layer height: strictly 0,2
Nozzle diameter: 0,4mm or 0,6mm
Infill: 15-20%
Perimeters: 5
Support: NO
make sure to activate fine line printing
You can see my other models here:
________________________
If you like my designs and want to support me or sell physical prints, you can check out my patreon
https://www.patreon.com/meafdesigns
________________________
License:
Creative Commons — Attribution — Noncommercial
7
MEAFdesigns
