August 31, 2022
Description
Nothing fancy, just a standard filament swatch.
Dimensions are 30×80×2.2mm.
The upper area contains 10 thickness steps (0.2 to 2.0mm). Useful mostly for translucent materials.
The lower area contains a recessed space for either raised text or an adhesive label. The SCAD source resizes the text to fit (within reason). If the text is set to "", a shallower and slightly wider space for an adhesive label is generated instead.
The upper-left corner contains a 3.5mm hole for a 3mm bolt, a book ring or just a loop of filament.
Best to print at a 0.2mm layer height to maintain even steps.
License:
Creative Commons — Public Domain
7
Steve DeGroof
