DIY Face Mask

Simple DIY mask with flexible filter media options. Three sizes available; small, medium and large. Use string, elastic cord, rubber bands, or other options to secure to head. anchors around the frame are very handy to wrap string around for a snug fit. Mask frame will conform under tension, or can be heated and formed to the face.

Ultimate goal is a low cost, fast printing, simple mask that could be used and discarded.

"Make everything as simple as possible, but not simpler." Einstein

This is a very fast print at 14 minutes for the large sizes. Two larges, three mediums or three smalls can fit on a standard 200mm X 200mm build plate.

ABS and PLA are both acceptable materials to print with.

Note: This mask is not as effective as a N95 HEPA, MERV 16, etc. but this is better than nothing.

Check out this link for more information about Best Materials for Making DIY Masks
https://smartairfilters.com/en/blog/best-materials-make-diy-face-mask-virus/?fbclid=IwAR28ZtZP3utwGHE1hmqXdoeqxgHMpWmtT5lhNYXB1I33hURVa_j-pnDd7jo

More discussion about the Face mask here:
https://www.facebook.com/groups/opensourcecovid19medicalsupplies/permalink/677025009774561/

*Please provide feedback and picture**

Solidworks 2020 file Located Here:
https://grabcad.com/library/diy-face-mask-1
The Solidworks files are open for modifications. All I ask is to reference this design :-)

Update:

• 3/22/2020 FACE MASK REV2 uploaded
  1) Now is three sizes ( Small Medium and Large)
  2) Thinner Frame compared to REV1. Frames now contour better to user's face
  3) Larger holes to accommodate elastic cord.
  4) Solidworks Models are more parametric. Should Allow for better derivatives from community.
• 3/22/2020 FACE MASK Filter template REV2 uploaded. All Three cutting pattern are in one tool
• 3/23/2020 Mask in the news https://tribune.com.pk/story/2181993/1-pakistani-volunteers-3d-print-ventilators-join-war-covid-19/
• 3/25/2020 Tech Port Video https://www.youtube.com/watch?v=eLVmrvRpNIk

Print instructions

How to form the mask frame to the face (PLA)
Option 1 (3D printer bed)
1) Heat 3d printer bed to 65-75C
2) Place mask frame on bed
3) Wait 10-20 seconds or until frame is mold-able
4) Press mask frame against face. Allow frame to cool
Option 2 (hot water)
1) Boil water
2) Place mask frame in water
3) Wait 10-20 seconds or until frame is mold-able
4) Remove frame with tongs. Water is very hot, do not use hands
5) Press mask frame against face. Allow frame to cool
Option 3 (Heat gun or blow dryer)
1) Set Heat gun to low or Blow dryer to high
2) Heat mask frame until it is mold-able. (5-15 seconds?) Move heat source around the whole time.
3) Press mask frame against face. Allow frame to cool