Collapsing Bo Staff

Collapsing Bo Staff

These Bo Staffs collapse back into the handle similar to my other collapsing swords. There are two sizes; small and large.

You will need 150mm of Z for the small and 205mm of Z for the large. The small staff’s handle is 30cm long but extends to 140cm, and the large staff’s handle is 41cm long but extends to 180cm long. The small is more child size and the large is more adult size.

The handle consists of two parts that screw together with a threaded connector. I would print the connector with a few more perimeters to make it a little heavier. 

Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my website. If this is your first time printing, I would suggest you try the test print first.

Printed on the Muldex rep-rap IDEX printer