Nozzle Change and Tool Organizer

This amazing organizer hangs from the side of the aluminium extrusion and keeps your nozzles and tools to change them handy. Fits and clears all parts MK3/s, for other models you need to check yourself.
The big red 16mm wrench holds the heating block, the RC Model wrench is used for unscrewing the nozzle. Both tools are insulated with old bicycle inner tube. The short section of bike tube is used to take the hot nozzle out of the wrench without burning your fingers or ruining the nozzle with pliers :-)

There are two models available: one with labels and one without labels.

Tools:
Look for RC Model Wrench or Cross Wrench and make sure it has a 7mm hex kex on it.
The 16mm wrench is a lot harder to find. I bought https://www.aliexpress.com/item/32836802557.html?spm=a2g0s.9042311.0.0.27424c4dpfzeo7
No guarantee that this item still exists when you view this post :-)