September 25, 2022
Description
This a mounting spacer for a Desmond DMH-2 Tripod/Monopod Tilt Head. It adds 24mm of height from the mounting point to the base of the tilt head. I created this to use on a motion slider so my pan/tilt controller would clear the rail in a steep vertical position.
Printer Brand:
Robo 3D
Printer:
R1 PLA Model
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Hatchbox PLA
Category: CameraLicense:
Creative Commons — Attribution — Noncommercial
AstroStock
