Bird Feeder

Time to hang this in a tree, put some seeds and start looking at the wonderful birds speding the winter feasting in it !

Comes into 2 parts to print:

• roof, with a hook to hang from a branch
• bottom, with 2 holes to evacuate water, should some come inside

You'll also need 3 dowels (roughly 15cm each) of 8mm diameter. Simply glue everything in place using CA glue. You might have to enlarge the holes with a drill bit.

I've printed both without supports, roughly 7 hours for roof and 6 for bottom (I've used 0.2 quality since I didn't care about time spent)

Fully designed by me with Fusion360, https://a360.co/3r5whZD 

Bonus:

• live print of the roof : 

• live print of the bottom: