October 1, 2022
Description
Lamp shade for window-
The lamp shade are threaded M10 x 1 to fit cable strain relief and nipple. Add cable, cable strain relief, lamp socket and lamp bulb.
Strain relief can be printed using https://www.prusaprinters.org/prints/24448-lamp-cable-strain-relief
Cable nipple could be found e.g. https://www.clasohlson.com/se/Nippelmix/p/Pr323423000
Use lamp bulb E14, LED only to avoid overheat the lamp shade.
The lamp shade spread light better if inside of the shade is painted e.g. gold or silver inside.
No support is required to print the lamp shade, however one single layer is built into the model as support and needs to be cut to allow installing the cable nipple.
License:
Creative Commons — Attribution — Noncommercial
Lupis1
