April 7, 2020
Description
This is my version of the Repconn A3 Rocket which is shown in Fallout New Vegas as they leave for the Great Journey.
Modeled in Fusion 360.
Minimal supports, but use a brim since the fins need to be stable for a successful print.
Print:
1 Rocket
1 Rocket Motor
1 Pitot Tube
2 Small Windows
6 Big Windows
Enjoy
3D PRINTING SETTINGS
.1 or .12
Supports from build plate
Brim set to 0mm offset to ensure fins don't pop off
Print at .1 or .12 layer height
Use a BRIM to help ensure the rocket doesn't fall over on the bed slinger
Use support from Build Plate Only
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Al Mon
