June 7, 2024
Description
Version 2 (1.0) of the Z and X Axis drag-chain assembly, there is an option of using either 10x15 or 10x20 width chains on the Z Axis.
*ADDED: EVA3_X_CHAIN_MOUNT_1.0 (Used to connect the X-Axis chain to EVA 3.0 Toolhead assembly).
*UPDATED: X Axis Pulley access through top of X_MOTOR_CAGE.
These chains are the same three hole type used on the Voron line of printers.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Squirrelbrain
