Soap dish

Contest Soap Dishes resultet in many different models of soap dishes, but ...
Do I want to spend more than 7 hours to print single soap dish? Not really.
I want something simple, nice looking and quick to print.
For this reason there is one more soap dish on Printables.

Print settings:

• Layer height: 0.3 mm
• Supports: No

Some remarks to the insert part.

Model of insert part is created as solid. Modified mesh is used to set top and bottom solid layers to 0 - for details see attached 3mf files. For my prints infill was set as Grid - other option could be Honeycomb.

Attached are two variants: A and B. In variant A insert part the insert part is simply laying on the dish - it is practical for cleaning of the dish. In variant B four connection posts between the insert part and the dish make a little bit stronger connection, but it is still possible to take parts apart for cleaning.