IKEA container SAMLA cover clamps

To seal my IKEA SAMLA containersI need some clamps to keep the cover in place. The design is simple, works good without an additional rubber seal but has a real tight fit with an additional sealing (what was my goal)

As usual I've attached the Fusion 360 file to make adjustments easier for you. You will also find a factory file with the settings from my Prusa MKS2 and PLA from rigid ink.

Side note: I'm new to 3D printing and I've to learn everything. I believe that making things on your own from the very first step is harder but finally you will get things done. Because of that I try not to download lot of things but create them from scratch. Even if they already exists. By sharing those things I hope to get feedback that I can improve my skills. So don't be angry if I upload things which already exists here.

I can't upload Fusion 360 files here, but you can download those from my Thingiverse page: https://www.thingiverse.com/thing:2458378

IKEA box SAMLA cover clamps: https://www.prusaprinters.org/prints/2943-ikea-container-samla-cover-clamps
IKEA box SAMLA Spool holder with mounting helper: https://www.prusaprinters.org/prints/2944-ikea-container-samla-spool-holder-storage
IKEA box SAMLA Spool holder spacer: https://www.prusaprinters.org/prints/2942-ikea-box-samla-spool-holder-spacer
PTFE tube caps with filament catch: https://www.prusaprinters.org/prints/2940-ptfe-tube-cap-with-filament-catch
PTFE tube organizer: https://www.prusaprinters.org/prints/2462-ptfe-tube-organizer
PTFE tube mount: https://www.prusaprinters.org/prints/2458-ptfe-tube-mount-replacement-for-pneumatic-connecto

Print instructions

Resolution: 0.15mm or better
Infill: 30% or more
Supports, Rafts: No