October 24, 2022
Description
Printed using Black MG95 ABS
| Layers | 0.2mm |
| Walls | 2 |
| Top/Bottom | 5 |
| Infill | 15% Gyroid |
| Bed Adhesion | Brim (3mm or 5mm) |
| Supports | Yes (Touching Bed only) |
PS: You need to add a “support blocker block”. Resize and move it to cover everything above 7mm so you don't have to clean up supports in the inside.
In case you forget to block supports, you can use a drill bit to clean up supports inside.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
victornpb
