February 24, 2024
Description
This is a recreation of the Lightsaber of Jedi Padawan Reath Silas from Star Wars: The High Republic.
It can hold a collapsing blade and a Lumintop EDC01 Flashlight. The blade is made up of 6 segments, each 18cm long, and it's about 85cm long fully extended. See this model for the blade.
The flashlight can be substituted for a printed dummy flashlight (lightsaber-dummy flashlight.stl).
The lightsaber is split into 12 pieces. You will need the colors black, gold, bronze, and grey.
| piece | color | layer height | supports | other settings |
|---|---|---|---|---|
| lightsaber-reath_top_black | black | 0.2mm | yes | - |
| lightsaber-reath_emitter_gold | gold | 0.2mm | yes | - |
| lightsaber-reath_top_button_grey | grey | 0.2mm | no | - |
| lightsaber-reath_top_gold | gold | 0.2mm | no | - |
| lightsaber-reath_middle_black | black | 0.2mm | no | - |
| lightsaber-reath_middle_bronze | bronze | 0.2mm | no | - |
| lightsaber-reath_middle_gold | gold | 0.2mm | no | - |
| lightsaber-reath_flashlight_holder_gold | gold | 0.2mm | no | - |
| lightsaber-reath_flashlight_screw_any | any | 0.1mm | no | spiral vase mode, no bottom layers, no brim |
| lightsaber-reath_cap_screw_any | any | 0.2mm | no | - |
| lightsaber-reath_end_cap_black | black | 0.2mm | yes | reduce overhang threshold to <45° |
| lightsaber-reath_cap_button_grey | grey | 0.2mm | no | - |
See the last render for how everything fits together. A purple arrow means that two pieces are glued together. A green arrow means that they slide or a screwed together without any glue.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
Update [2024-02-23] Added dummy flashlight
License:
Creative Commons — Attribution
DanielAlex
