Voron 2.4R1 XT60 Skirt Mount

Voron 2.4R1 XT60 Skirts Mount to passthrough juice for externally mounted hardware like an ERCF using an ERCF-Easy-Brd. May also work with the R2 and/or the Trident ( depends on the size of the Skirts Hexagonal Holes ).

BOM:

• The two 3D printed Halves ( needs to be separated in the Slicer )
• 1x Amass XT60 Connector ( the ones with the cover in the back )
• 2-4x M2x10mm Screws ( Socket or Round Head Screw )

Installation:

1. Solder the Wires to the Male XT60 Connector Plug.
2. Create a Sandwich with the two halves of the Mount with the Connector and the Skirt between them.
3. From the inside - Screw the two halves together using 2-4x M2x10mm Screws.
4. Profit!