Doodlebob Pen/Pencil Holder

I've remixed this Doodlebob Pen/Pencil Holder from https://www.thingiverse.com/thing:4151595. With the previous iteration, the eyes, nose, and tie were solid which meant if you wanted it to look screen accurate you would have had to draw on the black parts with a sharpie unless you had a multi material unit to print with. I have removed the additional space from the eyes, nose and ties so that this can be printed in black and white and still uphold the screen accurate look.

There will be 3 color changes in this print. Start with white, change to black from layer 43-49, change back to white from layer 49-65, then change to black for the remainder of the print. These are the layer changes I used so your experience may vary depending on print settings and the software used. (I used PrusaSlicer). Since the mouth portion is black, there will be a black line on the side of the print, so you are more than welcome to skip this color change and just use a sharpie, but the teeth is a bit tough to get a sharpie into (unless you have a finer tip sharpie) so just make sure you are aware of that before you print this method.

I have included a screenshot of my slicer with the color changes showing. It makes it look a lot better and ensures you are printing them correctly. You can print as many as you want with the color changes since they are all the same height. No supports needed as well.