Three cute Mushroom friends - free to combine - 72 variants

Three cute Mushroom friends - free to combine - 72 variants

If you like it --> press like it :-)

Here you can combine your mushrooms with different stalks and caps.

At the pictures, i switched the caps… have you mentioned it? ;-)

Perfect as decoration for Thanksgiving and fall. Put some fallen leaves between and you have a nice atmosphere.

The stalks are available in three basic shapes, tall and slim, tall with a ring and short and fat. Each you can download with and without a face and the verions with faces in a slightly deformed pose to give them more emotions.

The caps are available in two basic shapes, some in the simple shape and with some imperfections and the flat one also with some dots and the new one as basic, with holes for the insert dots and with rounded holes that you need no inserts.

Would also look nice if it would be illuminated. Unfortunatelly i had no matching light at home, so i put it for the picture on a simple flashlight to show the effect.

For printing you can align it like shown on the picture. I used tree supports for some areas at the faces.

The flange diameter of the caps is 0.4mm bigger than the stalks for easy assembly. If you want to resize the models, the gap will also be resized. If you want 50% of scale, print the cap in 50.09% and if you want 25%, print the caps in 25.14% scale - than you will have the 0.4mm gap.

Would be happy to see your makes.