Safety corner

Rounded corner to baby-proof tables.

Credits

This design is 100% based on kg333s sleek design and OpenSCAD code here, I just tweaked the parameters and added side screw holes to make it print-in-place (no support material needed) by avoiding a top layer. This also makes the design a bit less intrusive and avoids having a protrusion on the table surface. But you need to use some adhesive additional to the bottom screw or use a side screw as well.

Please go to  his page and like & download the original design as well!

Versions

There are typical table thicknesses included: 45mm, 32mm, 30mm, 25mm, 18mm.
You can parametrize using the OpenSCAD customizer by using the included .SCAD file if you need another thickness. 

There are versions with 1 bottom screw only, or versions with a side screw in each side.

Use

Measure table thickness, print four corners and fix them to the table using powerstrips or screws.