20 Sharpie Permanent Markers holder

There are two parts of the Sharpie holder, which 20_Sharpie_holder is a base and 20_Sharpie_holder_pad is just a decoration - it is not necessary to print.  

Hole diameter = 13 mm / 0.51 in

• No supports
• No glue
• 15% Lightning infill is sufficient, but with at least 3 perimeters
• PLA or whatever
• Textured steel sheet is recommended - looks cool

Don't forget to share your color/material variants ;)

Tip: In PrusaSlicer, arrange the model with the top surface (side with the holes for markers) laying on the print area. See the picture.