November 28, 2022
Description
6" diameter cat planter with vented liner. The liner comes out and is printed separately. There are holes in the side of the liner and spaces at the top between the liner and the pot to let air in.
Neither need any support or adhesion. The liner overhang should be small enough to print with no (or minimal) fraying.
Photos: Hatchbox Granite II PLA, Overture black PLA, both run at 200/62 on a stock Ender 3 V2. The pot was run at 10% infill.
License:
Creative Commons — Attribution — Noncommercial
Anthony Cerqua
